MS Fabrication
Mild steel fabrication job work — 3 to 12 mm plate and rolled sections, cut, formed, welded, painted and delivered.
Arc (SMAW) and CO₂ (MIG/MAG) welding
Infrastructure
Machinery, processes and capacity
The question every sourcing engineer asks first is whether we can make their part at their size in their material. This page answers it without you having to phone.
Capacity
What we can take on
| Parameter | Capacity |
|---|---|
| Largest fabricated structure | 45 × 60 ft footprint, 20 ft clear height |
| Plate thickness | 3 mm – 12 mm |
| Sheet gauge | 0.8 mm – 4 mm |
| Materials | MS, SS 304, SS 316 |
| Welding processes | Arc (SMAW), CO₂ (MIG/MAG), Argon (TIG) |
| Finishes | Painting, powder coating, pickling & passivation, matt / brushed / mirror |
| Batch capability | 50 – 65 unit runs demonstrated |
| Site work | Fabrication, transport and erection across Maharashtra |
These figures are what we have actually delivered. If your job sits above them, say so at enquiry stage — we would rather tell you honestly than take a job we cannot finish well.
Machinery
Equipment in the shop
| Equipment | Process | Used for |
|---|---|---|
| Arc welding machines | SMAW | Structural steel and heavy plate work |
| CO₂ welding machine | MIG / MAG | Sheet metal, trolleys, batch assemblies |
| Argon welding machine | TIG | SS 304/316, thin gauge, hygienic welds |
| Gas cutting set | Oxy-fuel | Plate cutting and profile cutting |
| Bench drilling machine | Drilling | Holes, counterbores and tapping |
| Lathe | Turning | Shafts, bushes and machined components |
| Grinding | Finishing | Weld dressing, edge prep, surface finishing |
Infrastructure
Shop and sheds
Heavy shed
45 × 60 ft
20 ft clear internal height
Light structure units
3 × (30 × 60 ft)
Fabrication and assembly bays
Two locations
Satpur & Ambad
Office and fabrication works
Processes
Job work we take on
SS Fabrication
SS 304/316 fabrication — TIG welded, pickled and passivated, finished matt or mirror for process and food equipment.
TIG (argon) welding
CO₂ / MIG Welding
CO₂ / MIG welding job work for sheet metal assemblies, trolleys, stillages and batch production in MS.
MIG / MAG (GMAW), CO₂ shielded
TIG / Argon Welding
TIG argon welding for SS 304/316, thin gauge sheet and hygienic food-contact welds.
TIG (GTAW), argon shielded
Arc Welding
Arc welding (SMAW) for structural steel and heavy plate, at the works and on site.
SMAW (manual metal arc)
Gas Cutting & Profile Cutting
Oxy-fuel plate cutting, profile cutting, cut-outs and weld edge preparation.
Oxy-fuel (oxygen–LPG) cutting
Lathe Turning & Machining
Centre lathe turning — shafts, bushes, agitator shafts, spacers and machined components in MS and SS.
Turning (centre lathe)
Drilling & Grinding
Bench drilling, tapping, weld dressing, edge preparation and surface finishing.
Drilling, tapping, grinding, finishing
Turnkey Fabrication Projects
One contract from drawing review through fabrication, erection, sheeting and finishing — the whole unit, not just the steel.
Design review · fabrication · erection · finishing
Does your job fit our shop?
Send the drawing. If it is outside our capacity we will say so plainly, and usually point you somewhere that can do it.